For many years there seemed to be just one single reputable path to store information on your personal computer – having a hard disk drive (HDD). However, this kind of technology is currently displaying its age – hard drives are really noisy and slow; they can be power–hungry and are likely to create a great deal of warmth throughout serious procedures.

SSD drives, alternatively, are really fast, use up a smaller amount energy and are also far less hot. They provide a whole new approach to file accessibility and data storage and are years ahead of HDDs with regards to file read/write speed, I/O performance and also power effectivity. Figure out how HDDs stand up up against the modern SSD drives.

1. Access Time

Image

With the release of SSD drives, file accessibility speeds have gone through the roof. Thanks to the brand–new electronic interfaces found in SSD drives, the standard file access time has shrunk into a record low of 0.1millisecond.

Image

HDD drives rely on rotating disks for data storage uses. Each time a file will be accessed, you will need to wait for the correct disk to reach the correct place for the laser to reach the data file involved. This ends in a regular access rate of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Due to the completely new significant data storage strategy adopted by SSDs, they feature speedier file access speeds and swifter random I/O performance.

Throughout Bridge City Hosting’s trials, all of the SSDs demonstrated their capacity to deal with at least 6000 IO’s per second.

Image

Hard drives present reduced data access rates due to the older file storage and accessibility technique they’re using. And they also demonstrate significantly slower random I/O performance as compared with SSD drives.

For the duration of our trials, HDD drives dealt with around 400 IO operations per second.

3. Reliability

Image

The absence of moving components and rotating disks inside SSD drives, and also the latest advances in electronic interface technology have resulted in a substantially risk–free data file storage device, with an typical failure rate of 0.5%.

Image

HDD drives use spinning hard disks for saving and reading data – a concept going back to the 1950s. Along with disks magnetically hanging in the air, rotating at 7200 rpm, the prospects of some thing failing are considerably increased.

The standard rate of failing of HDD drives can vary among 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have any moving components and require little or no chilling power. In addition, they call for not much power to work – tests have revealed that they’ll be powered by a common AA battery.

In general, SSDs take in amongst 2 and 5 watts.

Image

HDD drives can be renowned for being loud; they can be more prone to heating up and in case there are several disk drives in a server, you must have a further cooling unit just for them.

All together, HDDs use up between 6 and 15 watts.

5. CPU Power

Image

SSD drives support faster file accessibility rates, that, in return, encourage the processor to accomplish data requests much faster and to return to different duties.

The regular I/O hold out for SSD drives is barely 1%.

Image

HDD drives accommodate reduced access speeds in comparison to SSDs do, which will result for the CPU being required to hold out, although reserving allocations for the HDD to uncover and give back the required data.

The common I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

Almost all of Bridge City Hosting’s new servers are now using simply SSD drives. Our own tests have shown that having an SSD, the common service time for an I/O request whilst performing a backup stays below 20 ms.

Image

In contrast to SSD drives, HDDs feature significantly slower service times for input/output requests. During a hosting server backup, the average service time for any I/O query can vary somewhere between 400 and 500 ms.

7. Backup Rates

Image

You’re able to experience the real–world potential benefits to using SSD drives daily. As an example, on a web server designed with SSD drives, a complete back–up will take simply 6 hours.

Image

In the past, we have got worked with primarily HDD drives on our web servers and we are well aware of their general performance. With a web server furnished with HDD drives, a complete web server data backup may take about 20 to 24 hours.

Our VPS servers along with the standard Linux shared plans accounts include SSD drives by default. Be part of our family here, at Bridge City Hosting, and see the way we can help you revitalize your website.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is installed for you at zero cost. 99.9% network uptime. Full root server access rights.
  • Compare our prices

  •  
  • Check out our price list and choose the right Virtual Private Server for your active web sites. It is easy to move up to a more feature–rich VPS Web Hosting setup with only a click of the mouse.
  • Compare our hosting plans
  • Contact Us

  •  
  • It is easy to make contact with us 7 days a week by email or by making use of our super–fast ticketing system. We offer a 1–hour reply–back time guarantee.